This research investigates the potential of natural jute fibre nets to enhance the flexural strength of geopolymer concrete tiles. Two types of jute fibre grids with surface densities of 120g/mm² and 220g/mm² were tested in four configurations. The objective was to determine the configuration that most …

The following paper refers to the final thesis for the curriculum at HZ University of Applied Science and was carried out at the request of the Italian firm Aig Associati and Partner. The structural team of the architecture and engineering firm requested a study on the most effective and least time-consuming …

Pavements are used everywhere, and are of a major importance in the infrastructure. However, conditions for which these pavements are designed for and built in are rapidly changing due to climate change. The trends observed in the Netherlands suggest a maximum temperature increase of 3 degrees Celsius …

Within BAM Infra (Netherlands) there is a 3D concrete printing facility already. This is the Europe's first commercial and industrial production location for 3D printing of concrete elements for bridges. The idea now for BAM (International) is to also include composite materials in the design of temporary …

The goal of this research was to set up suitable laboratory tests and analysis methods for the strength and durability testing of bio-based textile reinforced concrete. This thesis was a preparatory research for the actual development of bio-based TRC applications, which was not undertaken due to unforeseen …

This final report for acquiring the bachelor of Civil Engineering focuses on the structural and geotechnical design of the foundation of a data centre, to be built on contaminated soil. In order to determine the most suitable design in accordance to the Client’s requirements, the research into the structural …

Coupling beams between shear walls are one of the key elements for energy dissipation in tall buildings. A representative mathematical model of coupling beam should represent flexure, shear and interface slip/extension mechanisms simultaneously. This goal can be achieved by using either detailed finite …

It is historically a fact that Turkey experiences frequent earthquakes, on the order of one damaging earthquake of magnitude 6–7 approximately every 2 years, causing extensive losses to economy, life and limb. Every strong earthquake leaves behind poverty and tens of thousands of homeless people. In …

Assessment of the seismic vulnerability of the building stock in the earthquake-prone Marmara region of Turkey is of growing importance since such information is needed for reliable estimation of the losses that possible future earthquakes are likely to induce. The outcome of such loss assessment exercises …